If your TV is not receiving a signal, there could be various reasons for this. Several possible solutions help with this problem.
No TV signal: causes and solutions
A disruption in television reception is annoying, but in many cases it can be remedied quickly. You can find out where problems can lurk here.
- A real classic that always leads to success: Checkall Cable and simply plug it in again if necessary. Turning the antenna, amplifier, receiver and television off and on can also help.
- If you use a receiver, you should make sure that your TV is powered by this receives a signal. An error message from the receiver is also enough to further narrow down the problem: If your TV receives a video signal from the receiver, you can rule out a interference between these two devices.
- Start a new channel search. If the Program assignment Your TV provider changes, your TV will no longer find the individual channels.
- At a Satellite system It may happen that the bowl is out of place. Due to stronger winds or advanced age of the system, exact alignment is not always guaranteed. Therefore, rearrange the bowl.
- Also Distributor and amplifier in the house can cause problems. Check the power supply and signal cables here. Make sure the antenna has power.
- If you are in a condominium with central satellite dish If you live, you can find out from your neighbors whether their television isn't working either. This will help you rule out that the cause of the problem is yours.
- Check if your TV has a built-in DVB-C tuner has. If this is not the case, you should get a DVB-C receiver. Older TVs can usually only process analog television signals.
- Da das analog cable television 2019 in Germany completely switched off these TVs require an additional tuner or satellite reception. On the other hand, you can no longer use them.
- Notice: If the problem persists, you should contact your provider. This can help you with further troubleshooting. Use primaryCable TVwe have summarized the best possible solutions in another article. These will help you out in an emergency.
No reception on Smart TVs: solutions to problems
If you use a Smart TV, you can do the following Problems ensure the lack of reception:
- Check if you have the current one Firmware-Update have installed. With Smart TVs, outdated software can cause problems including poor or non-existent connection.
- Check whether the WiFi connection to the television. If necessary, restart the connection or select a different network.
- Restart your router if there are problems with the WiFi connection. Furthermore, the WLAN router should have one sufficient bandwidth to ensure that reception remains permanent.
- It can also help to remove the smart card and insert it again. This way you can be sure that they sits correctly and can also check them for damage that would affect their function.