With the release of the iPhone 16, Apple has once again launched a device that is waterproof to some extent.
How waterproof the iPhone 16 really is
The iPhone 16 comes with an IP68 certification according to IEC standard 60529. This certification means that the device can survive up to 30 minutes at a maximum depth of 6 meters in fresh water without damage. However, note that these values were tested under laboratory conditions and water resistance may decrease over time due to wear and tear.
- Maximum depth: The iPhone 16 can withstand depths of up to 6 meters. This limit should not be exceeded permanently, as this can put strain on the seals.
- Avoid salt water: Salt water can damage the iPhone's internal seals. If the device comes into contact with sea water, immediately rinse it with fresh water to avoid damage.
- Chemicals and chlorinated water: Chlorinated water, such as in pools, also poses a risk. Chlorine can have similar effects to salt water. Make sure to clean the device thoroughly after contact with chlorinated water.
Handling the iPhone 16 after contact with water
Although the iPhone 16 is considered waterproof, you should take precautions when caring for and handling it after exposure to water to avoid damage. Here are some practical tips:
- Dry the charging port:Never charge the iPhone immediately after contact with water. The charging port should be completely dry before you plug the device back in, otherwise there is a risk of a short circuit.
- Protection against impacts: If the iPhone 16 has been dropped, the seals may be damaged, compromising the water protection. In this case, it is recommended to have the seals checked at an authorized service center.
- Drying the device: If your iPhone falls into water, dry it thoroughly. Do not use heat sources such as hair dryers, as these can damage the electronics. Instead, let the device air dry or place it in a room with low humidity.