If you have problems with your Speedport w701v router or want to change settings, it may be helpful to reset the device.
Resetting Speedport w701v: Preparations and possible effects
In some situations it may be necessary to reset the router to the factory settings. This may be the case, for example, if you are having problems establishing an Internet connection or if there are problems with devices on the network. Even if you bought your router second-hand, it is a good idea to reset it to the factory settings first.
- Before you reset your Speedport w701v, you should be aware that all current settings will be lost. This includes network names, passwords and special configurations.
- It is recommended that you write down or save important data beforehand so that you can restore it later. Have your Internet provider's login details ready.
- These are needed to reconfigure the router after the reset. If you are not sure how to reconfigure the router after the reset, you can often find this information on your provider's website or in the router's user manual.
- It's also helpful to make note of all the connected devices so you know how to reconnect them if they reset. This includes PCs, smartphones, and other devices that use the Wi-Fi.
Resetting the Speedport w701v: How to proceed
You will need a small object such as a bent paper clip or a thin pen to reset the Speedport w701v.
- Look for the small reset button on the back of the router, usually located in a recess. Gently press and hold this button for about 5 to 10 seconds.
- During this process, you should observe that the LEDs on the router start to blink or behave differently. The blinking of the LEDs indicates that the reset process has started.
- Release the reset button and wait a few minutes until the router has completely rebooted. The LEDs will stabilize after a while and indicate that the router has been reset to its factory settings.
After the reset: Reconfigure the Speedport
After the router has been reset, you will need to reconfigure it to be able to connect to the Internet again.
- Connect a computer or smartphone to the router's network. The default network settings can usually be found on the bottom of the device or in the user manual.
- Open a web browser. In the address bar, enter the router's default IP address. This is often “192.168.2.1” or “192.168.1.1”.
- Log in with the default login details. After logging in, you should be taken to the router's configuration menu, where you must enter your Internet provider's login details. This data is necessary to restore the Internet connection.