If you cannot access the Speedport IP, there is no need to despair. With a little patience you may be able to solve the problem.
Speedport IP doesn't work – that could be the problem
It's annoying: you want to access the Speedport IP, but the plan fails. This can have different causes. Therefore, follow a few tips and hints to access the configuration page.
- First, try turning off your router and restarting the device. This process often leads to the desired effect and speedport.ip works without any problems.
- If speedport.ip still doesn't open, try this option: Enter https://speedport.ip https://192.168.2.1 in your browser's URL bar. This is always the address of the Speedport router in the local computer network.
- If the browser asks you to accept a certificate when loading speedport.ip, follow these instructions. Some browsers do not know the certificate of the respective speed port.
- It may happen that your antivirus and security software or firewalls are interfering with access to speedport.ip. Deactivate all programs before accessing speedport.ip again.
Assign a fixed IP address for your PC – it's that easy!
If speedport.ip still doesn't work, assigning a fixed IP address often helps. To do this, just follow a few simple steps.
- The first step is to open your PC's Control Panel. Next, click “Open Network and Sharing Center” and select “Change adapter settings.”
- Now right-click on “Wifi/WLAN connection” with your computer mouse and select “Properties”. Here select “Internet Protocol Version 4 (TCP/IPv4)” and click on “Use the following IP address”.
- Now specify under “General” that you want to use a specific IP address and specific DNS server addresses. You now have the option to store an IP address in your system.
- It is important that you enter “192.168.2.x” under the IP address. Replace the Under “Preferred DNS server” also enter “192.168.2.1”.
- Save the settings by clicking “OK”. You now have access to speedport.ip.